Bug Reports

[doomfred]

Post the bugs you think you have found here.

[doomfred]

Bug title: MIDI CC settings bug
Description : When changing the CC numbers affected to the slots (for setting them on/off), only the parameter on slot #0 will be recorded. If you change the CC affected to the other slots, if you shut off then on the unit, the new values are replaced by the default ones.

[Deleted]

The only 2 bugs that i have found are:

1) If you (in the tuner) hit unintentionally "slot select" button, the unit freeze (problem solved by turning off the machine, wait a second, and turn it on)
2) One time i turn the unit on, and there was no sound (problem solved just like the first one)

Anyway not important bugs and very easy to solve!

[shapfuh]

I've noticed that if I turn on the MA while he's still plugged to my comp for remote control I get a blank screen on the MA.

Solution : unplug the USB cable and restart your MA.

[mork]

Jan 12, 2015 18:39:55 GMT shapfuh said:

I've noticed that if I turn on the MA while he's still plugged to my comp for remote control I get a blank screen on the MA.

Solution : unplug the USB cable and restart your MA.

Yep had that one myself :-)

[snouttrout]

I am getting a popping sound when I switch channels using the Midi Moose by Tech21. This happens when I change from a distorted sound (like that of channel 2's Triple 6) to a clean sound on channel one, but only if I use a different PAD  setting for for the clean channel: namely, a higher PAD setting for the clean channel. 

If I use the same PAD setting for all channels, there is no noticeable click. The compressor seems to have no impact on the click sound. Not a big deal because I can just use the same PAD setting on each channel.

[doomfred]

I'll try to reproduce that one

[snouttrout]

Thanks!

[buffsgin]

If the click sound is coming from the unit, and not the speakers, it is a relay. I get this sound from mine when changing channels with a pedal board. They might use a electrical/mechanical relay to protect the other electronics because the power amp is so powerful and could damage speakers and anything else. Maybe it works as a true bypass or maybe it has AC current going thru it.

[snouttrout]

The clicking sound is not coming from the speakers (I checked with another cabinet using the same settings). I consider it a bug because I can't use the higher pad setting when changing channels without getting the popping sound. But that isn't really that big of a deal to me. I just wanted to share so other people would know.

For me, the swirling sound is a much bigger problem. I really hope this will be corrected in the next update. I don't know if I will use the mulitamp live unless that particular bug gets worked out. I'm very disappointed about it.

In truth, I don't really hear it unless I'm playing alone and loudly with higher gain settings, but I'm afraid the swirling sound will be audible if my speaker cab is miced.

If everyone in the band is playing in the rehearsal room, then I don't hear it.

Thanks for checking!

[lucat]

I've noticed that using the Remote Control the USER bank 4 and 5 are always empty even if on the MULTIAMP there are the patchs!

[lucat]

The problem was caused when I imported the "custom preset", if i try to store a preset into USER bank 4 o 5 all works correctly.

[mauriblues]

Ho notato alcuni bug nel nuovo aggiornamento
1) la sezione DI e cabinet non mantiene in memoria il volume scelto ne la attivazione/disattivazione del cabinet
2)il bassaman 59 del canale Clean ha il seguente problema , il Gain non interviene e se azzero i potenziometri bassi medi e alti non esce più il suono devo spegnere e riaccendere il MULTIAMP. .. lo ha fatto ha qualcuno di voi?