|
|
Post by 99smooth20 on Jan 6, 2015 20:35:31 GMT
I have a stereo MULTIAMP that I am using to power a 4x12 cabinet. I am about to receive—on loan—an Axe-Fx, and wonder if I can run the outputs of the AF through the MULTIAMP in order to take advantage of its amplifier? If so, how should the AF be connected to the MULTIAMP?
Thank you in advance.
|
|
|
|
Post by doomfred on Jan 7, 2015 9:14:34 GMT
Yep, Dv Mark describes two possibilities in the manual :
- 1. you use the output of your axe fx to feed the input of the MULTIAMP, and make a preset with no slots activated.
- 2. you use the return of your MULTIAMP loop to receive the signal from the axe fx, and you create an empty preset, with a send/return block activated, in series.
|
|
|
|
Post by 99smooth20 on Jan 7, 2015 14:16:15 GMT
Thank you ... I somehow overlooked the manual's explanation.
|
|
|
|
Post by shapfuh on Jan 12, 2015 18:43:17 GMT
I have a stereo MULTIAMP that I am using to power a 4x12 cabinet. I am about to receive—on loan—an Axe-Fx, and wonder if I can run the outputs of the AF through the MULTIAMP in order to take advantage of its amplifier? If so, how should the AF be connected to the MULTIAMP? Thank you in advance. Hey ! I would be cool if you could post your feedback on your experience with the axe compared to the MULTIAMP. |
|
|
|
Post by 99smooth20 on Jan 13, 2015 15:35:38 GMT
Would be glad to but the loaner has been delayed. Will post when it's eventually available.
|
|
