|
|
Post by leperclown on Jun 29, 2017 10:21:32 GMT
Hi all. I have just bought the DV Mark midi pedal for my MULTIAMP Stereo (v 5.1). It works perfectly except for the volume pedal (Roland EV-5) function. The EV-5 is functioning normally as I have tested it on other effects pedals. I have the volume pedal effect selected and turned on in my presets, but the volume doesn't change at all with the pedal movement. Using the midi pedal menu system, I think I have configured and calibrated the pedal correctly. With the "CUr", the digits scroll from 10 to 127 when I move the volume pedal. The signal does not seem to be getting through to the MULTIAMP (I have tried different midi cables too). I am wondering if this is a bug. Very frustrating - any help would be much appreciated. Cheers! Paul
|
|
|
|
Post by leperclown on Jun 30, 2017 7:41:25 GMT
This issue was solved by Piero on the MULTIAMP Users Facebook page. I had done as indicated in the midi pedal manual, but the last stage was to leave the cursor on the "Pedal" parameter (within the Volume Pedal Slot on the MULTIAMP) and hold Enter for 2 seconds. "Set Expression" appears on the screen, and then the volume pedal works perfectly. This stage certainly wasn't in the manual or any of the videos I looked at. Well done, Piero!
|
|
|
|
Post by Ainsley on Jun 30, 2017 13:27:32 GMT
We were promised an updated manual it still hasn't happened, lots of very frustrated users !  |
|
Michiel from Netherlands
Guest
|
Post by Michiel from Netherlands on Sept 27, 2020 10:13:22 GMT
Hello MULTIAMP users, I have this problem with my MULTIAMP midi pedalboard: I use the program change incremental mode, but when pushing the up-button - that is button 8 - it goes directly from preset 1 tot preset 5, in stead of going from preset 1 to preset 2, then to 3 and so on. How can I solve this problem? Greetings from Holland, Michiel.
|
|
|
|
Post by Jedsk on Oct 22, 2020 9:24:57 GMT
Hi,
Did you check the preset mapping in the MULTIAMP (in the setup menu under midi)? it might just map preset 2 from midiboard to patch nr. 5 in MULTIAMP. Just a thought.
Best luck.
|
|
