|
|
Post by xeturian on Jan 23, 2015 10:01:22 GMT
Hey guys!! Every time i put the noise gate in a slot, it doesnt works properly, even tweaking the threshold and the attack it works as a fade in when strumming a chord or whatever. Anyone with this issue? I cant remember the spot in the effects chain, but does it really matters? Thank you guys!!!
|
|
|
|
Post by doomfred on Jan 26, 2015 8:30:44 GMT
Hello
Yes, the spot affects the way the sound is affected. If you use your MULTIAMP as a regular guitar setup, you should put the noise gate right after the last effect that will make noise, ie the more often the amplifier. Attack means the time the level hits more than the threshold level before the gates opens; Release the time the signal has passed lower the threshold level before the gates closes. The trick is to be able to find the lowest attack time and the longer release time without noticeable effect on the sound...
|
|
|
|
Post by xeturian on Jan 26, 2015 14:27:37 GMT
Nice doomfred!!!!
|
|
